3653 - 1959-1964 GM B-Body Non-Adjustable Panhard BarThis tubular set up quickly and easily replaces the stock panhard bar on the 59 64 GM B Body vehicle. After more then 35 years of abuse the stock panhard bar is usually rusted and corroded with bushings cracked and dry rotted. This new replacement panhard bar bolts in the factory location and includes new grease able high quality bushings. The panhard bar greatly increases rear end stability, controls side movement and body flex. Note: May not fit

SAE Viscosity Grade (Motor Oil) 0W20

TIG/MIG welds

Mitsubishi Evolution

This transmission cross member is designed for the installation of a 700R4 or T5 transmission into an 1982-1992 third generation F-Body

Our over-sized spherical bearings are designed to withstand the rigors of street and track abuse

200509 V10

degrees C neg 48

at degrees C 34 at neg 20 degrees C

Very minimal cutting is required and the mounting bolt threads into the box itself

Extended drain intervals

D4 ATF is a full-synthetic product designed with superior low-temperature properties compared to a Dexron III fluid

and TIG welded for exceptional strength