Potter PAD100-SIM Single Input ModuleThe PAD100 SIM uses one (1) SLC loop addresses when monitoring one (1) Class B circuit. The module mounts on either a 4 square or double gang box. The module is capable of monitoring one (1) Class B circuit. The PAD100 SIM includes one red LED to indicate the modules status. In normal condition, the LED flashes when the device is being polled by the control panel. When the input is activated, the LED will flash at a fast rate.

9 software or higher)

Genesis strobes do not require bulky specular reflectors and lenses

Channel Selective (Class A) or Band Selective (Class B)

It has a nominal transmitting range of 200′ and is intended only for indoor use

Optional GCTW Trim plate (White) available

The Notifier NMM-100P is an intelligent addressable miniature monitor module for FireWarden series two-wire systems that supervises a Style B (Class B) initiating device circuit of normally open dry-contact devices

and Style 4 (Class B) wiring configurations

Provisions for (4) J-nuts #8-32 ib 3-3/8" square

Mircom MIX-5351AP Intelligent Heat Detector

Indicators/UI: LED viewing window/light pipe for module LED visibility

Notifier AMPS-24 is the Power Supply for the NFS-3030

or 2 watt operation