Jeep Grand Cherokee WK2 11-21 Steering Knuckle to Wheel Bearing Hub Bolts 10.9Upgrade your junk OEM hub bolts with these 10. 9 Class (metric equivalent to Grade 8) hardened yellow zinc plated hex flange bolts. These bolt the front wheel hubs unit bearings to the steering knuckles. These fit better than the tapered factory bolts which were designed to reduce cost. They have far better corrosion protection over black oxide and have a larger hex head which is less likely to cause you problems the next time you need to remove them.

Aftermarket seats may use a different size

2005-2020 Chrysler 300

Fits 2007-2018 3

If you are still using the factory front track bar this is the set you need

All 4 washers are used on the bolt head side

The bushing you will receive is grey

We also sell a set of (4) 10

These are original unused factory screws from old inventory

9 Class flange lock nuts for the sway bar end links on all 2007-2018 Jeep Wrangler JK's and JKU's

Replaces Mopar 5096986AA

Replaces Mopar J4003120 and 154892AA

1987-2001 Jeep Cherokee XJ