GMKTec G5 Dual Mini PC 2U Rack Mount (Modular)3D Printed 2RU rack mount for 2x GMKTec G5 (N97) Mini PCs. This is part of our ModMount Range, so you can mix and match your parts! NOTE: You will need to pair this with another ModMount item (Like 2 Blanking Plates or another G5 Mount) to make a full 19" 2RU Width, screws are included to join the parts. The Mini PCs slide into the frame from the front with cables accessible from the rear. This listing is just for the Rack Mount, other photos showing

The Mount is made up of 2 parts and it comes pre-assembled

Mid 2010 onwards

The Firewall is securely held in place via the Backplate on the mount and there are also 2 Keystone Sockets on the faceplate for re-routing rear ports to the front of the mount (Keystone Jacks not included)

other photos showing Blanks (unless the Blanking plate option is selected) etc are just for example

This PRO Series mount will allow you to mount your Mini PCs facing either forwards or rearwards

3D Printed 2RU rack mount for the WiiM Amp Pro

3D Printed 2RU rack mount for 3x BeeLink SER5 PRO or SER5 MAX Mini PCs

The Switch slides into the frame from the front with its rubber feet still attached

Both devices slide into the frame from the front and have a snug fit

NOTE: You will need to pair this with another ModMount item (Like a Blanking Plate) to make a full 1RU Width

Also includes a Keystone Port so you can add keystone Jack to route the network cable around to the front (Keystone Socket/Cable optional extra)

3D Printed 1RU rack mount for the Dell / VMWare VeloCloud VC 610 or VC 710 SD-WAN Appliance