Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification1 Scope This document specifies requirements for six types of wire braid reinforced hoses and hose assemblies of nominal size from 5 to 51. This document also specifies the hose of nominal size 63 for types 2SN and R2AT, and the hose of nominal size 76 for type 2SN. They are suitable for use with: oil based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 67434 at temperatures ranging from 40 C to +100 C; water based fluids HFC, HFAE, HFAS and

Chairs and tables test personnel

designed to operate in the fully open and fully closed positions

Methods are described for verification of the geometrical and physical properties of the different parts of the test machine

What is BS EN IEC 62435‑3 about

Who is BS EN 62027 – Object lists for

Note 3: The titles of the publications referred to in BS 4975 are listed on the inside back cover

a) on the basis of temperature data derived from testing concrete filled unloaded tall columns and reference columns

General use of BS EN 60534-7 by contractors

5 l up to and including 15 l

typically before each series of measurements)

5 L WC flushing cistern and component manufacturers

NOTE 1 This European Standard does not cover leak shields since they are not part of a hose line