80 3-NO58 - RENOLD 1 Inch Pitch Premier Standard LinkThe standard connecting link for ANSI series detachable chains, also used on riveted chains where high speeds or arduous conditions are encountered. Supplied with two connecting pins riveted into the outer plate, the other outer plate being a press fit onto the pins and secured by split pins after assembly. Press fit connecting links can only be used once; new links must always be used to replace dismantled links.

BTW 140 C M /SP Basic Design Double Direction Angular Contact Thrust Bearing 140mm - Bore Size 60° Contact Angle Two Machined Brass Cages

The dimensions of the SKF NU1009ECP/C3 bearing are 45x75x16mm

60 22 TBR58 P4 Single Row 60 Series Bore Size - 22 - 110mm Inner Ring Guided Phenolic Resin Cage Precision Rating

This NU319-E-M1-C3 bearing is a single row cylindrical roller bearing

NU 23 22 E M1A Two Flanges on Outer Ring and No Flanges on Inner Ring Medium

BSR 20 60 SL Endless Linear Motion Type Width - 20mm Length - 60mm Stainless Steel

This LBD13 is a Standard Imperial Linear Bushing with No End Seal

Shell Tellus S2 M 68 20L Brand Type Size Material Safety & Technical Data Sheets

This R350L is a medium

SYNT 40 F Bearing unit with A plummer block housing Shaft Diameter Bearing unit for the locating bearing position

AOH 3156 G Withdrawal Sleeve Prepared For Oil Injection Withdrawal Sleeve Size Thread Diameter changed according to revised ISO standard

the SKF NUP211ECJ SKF bearing is built to withstand the rigours of industrial environments