Hygrothermal performance of buildings. Calculation and presentation of climatic data - Calculation of a driving rain index for vertical surfaces from hourly wind and rain data1 Scope This part of ISO 15927 specifies two procedures for providing an estimate of the quantity of water likely to impact on a wall of any given orientation. It takes account of topography, local sheltering and the type of building and wall. The first method, given in Clause 3 and based on coincident hourly rainfall and wind data, defines a means of calculating the annual average index, which influences the moisture content of an absorbent surface,

BS 1133-19 gives guidance on the use of desiccants in packaging for general use

L1 to L4 interference patterns have been included

applied to the heading area of unprocessed microfiche to improve legibility and to provide a visual classification of the processed microfiche

control the display of the picture

Note 1: BS EN 15288‑2 has limited application to classified pools which consist of segregated areas of rivers

Manufacturers of circuit control devices

This excludes structural hollow sections and tubes

BS EN 50632‑1 on electric motor-operated tools dust measurement Procedure

BS EN 60512-25-4 also specifies the required details for the users to conduct the test according to the detail specification

It’s different because it adopts the High Level Structure used in the other key management systems standards

This document addresses the subject of criteria for assessment of new extinguishants for inclusion in the ISO 14520 series

or formed cold with subsequent heat treatment above 580 °C to obtain equivalent mechanical properties to those obtained in the hot formed product